Simple operation, yet universally adaptable

 

 

Therapy with basic settings

• (A) Connect the power cable to the QRS 101 control unit

• (B) Connect the applicator cable to the QRS 101 control unit

Connect the whole-body applicator to the "Applicator A" connection. You can also connect the pillow to the "Applicator B" connection.

Note: It is not absolutely necessary to connect both applicators at the same time.

 

 

• (1) Turn on the QRS device

• (2) Choose from one of the three programs

• (3) Set the therapy period

• (4) Select the intensity

• Lie on the mat or if you are using the pillow, place it on the area to be treated

• (5) Start therapy

​

Therapy with individual settings

Changes to the basic setting can only be made when the device is switched on. No setting can be changed during therapy.

 

Change the intensity between levels 1 to 10

A change in intensity can be useful if targeted QRS therapy is to be used. Furthermore, an increase in intensity is recommended if you have installed the QRS mat in bed. If the QRS mat is below the sleep mattress, the distance to the active field increases. The intensity should be increased by one level for every 10 cm of mattress thickness.

 

(1) With the QRS device switched on, press and hold one of the intensity buttons for 2 seconds

• A flashing intensity setting appears on the display

• Depending on whether you want to increase or decrease the intensity, press the left button or right setting button (as in the illustration)

• Confirm the setting by pressing the A / B ok button between the setting buttons

• The last set value remains saved

 

Change the therapy time from 1 to 60 minutes

A change in therapy time is only recommended if you feel that it is beneficial for you. For example, sleep disorders can be improved by increasing the therapy time to 60 minutes.

 

(1) With the QRS device switched on, press and hold one of the time selection buttons for 2 seconds

• A flashing time setting appears on the display

• Depending on whether you want to increase or decrease the therapy time, press the left button or the right setting button (as in the illustration)

• Confirm the setting by pressing the A / B ok button

• The last set value remains saved

 

More functions

For detailed instructions on how to operate the other functions, please refer to the QRS 101 operating instructions.

 

 

 

(A) Switch between applicators

If you have connected the mat and pillow at the same time, you can switch between the applicators with the A / B button.

• To do this, press the A / B button

• Use the right button (arrow symbol to the right) to switch to applicator connection B (cushion)

• Use the left button (arrow symbol to the left) to switch to applicator connection A (mat)

• Press A / B again to confirm after selecting the port

 

(B) Switch display light on or off

The lighting of the display can be switched off automatically by the device, so as not to disturb the night's sleep, for example.

• Press the I / O button (left) with the light symbol to either activate or deactivate the automatic switch-off

 

(C) Setup of automatically starting QRS therapy

Setting up an automatic therapy start is useful, for example, if you have installed the QRS mat in bed. You can set up 2 therapy start times, for example in the morning before you get up and in the evening when you go to bed.

• For setting up the automatic therapy start, please refer to the QRS 101 operating instructions

 

(D) Switch sound signal on or off

A signal sounds when QRS therapy is ended. The signal can be switched off so as not to disturb the night's sleep, for example.

• Press the I / O key (right) with the sound symbol to switch the sound signal on or off when QRS therapy is ended

​